Pages
Categories
Archives
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- August 2009
- July 2009
- June 2009
- March 2009
- February 2009
- January 2009
- December 2008
- November 2008
- October 2008
- September 2008
- August 2008
- July 2008
- June 2008
- May 2008
- April 2008
- March 2008
- February 2008
- January 2008
- December 2007
- November 2007
- October 2007
- September 2007
- August 2007
- July 2007
- June 2007
- May 2007
- April 2007
- March 2007
- February 2007
- January 2007
Meta
91 accord tach, speedo in op #2?
29th June 2007
Gregory A asked:
follow up to 1st inquiry,
tach does not move on start or off position, Odom inop, Eng temp, fuel gage, elec clock ctr console inop also.
Turn sig, battery indicator works,4 ways work, instrument cluster lights up. car starts run well.
suspect speed sensor needs replacing with a few other sensors. check all fuses in Eng compartment and Drvr side fuse panel all good.
just tryin to get started in restoration of car. we have chassis electrical wirin diagram at hand.
want to start with electrical then move to body and interior. thanx!
Burt
follow up to 1st inquiry,
tach does not move on start or off position, Odom inop, Eng temp, fuel gage, elec clock ctr console inop also.
Turn sig, battery indicator works,4 ways work, instrument cluster lights up. car starts run well.
suspect speed sensor needs replacing with a few other sensors. check all fuses in Eng compartment and Drvr side fuse panel all good.
just tryin to get started in restoration of car. we have chassis electrical wirin diagram at hand.
want to start with electrical then move to body and interior. thanx!
Burt
Posted in: Cars | | Comments (1)
1 Comment
RSS feed for comments on this post.
Sorry, the comment form is closed at this time.
your best bet would be to go to a junk yard and get a new gauge cluster very easy fix as for the distributer their are 2 sets of plugs for it make sure the plug with 2 wires is connected all the way for that is your tachometer/rpm gauge and as far as the speedometer when and if you replace the gauge cluster there is a cable that runs from your ****** in through the firewall and into the gauge cluster replace that to if you go to a junk yard it should not cost no more then 35-40 for both. you could also check the speedometer cable that i was talking about see if it is pluged into the ****** but other then that it does not sound like a wiring problem what ever you do don’t start playing with wires they become a huge mess most of the time on honda’s its not bad wiring its a loose ground something small good luck you can contact me though honda’s are my life lol
Comment by 9crx0 — July 2, 2007 @ 2:45 pm